MZ electronic EV-030 - Alarm and functions menu

EV-030 Rev. 07 – 2008
English
37
Alarm and functions menu
Alarms & Functi
Up Alarm 3.0
Auto Down Off
Load Default No
Exit
Use the (DOWN) or (UP) key to move around the parameters.
Up Alarm
It is possible to enable the function and
establish the height at which the
anchor-winch stops; after which it is
only possible to give pulsed
commands.
Settable values: 1.0 - 1.5 - 2.0…5.0
(metres or feet).
Select with
Select value with
Confirm with
Auto Down
Enables the automatic anchor lowering
procedure, at the desired height, with
the pressing (for at least 3 seconds) of
the keys
and .
Settable value: 5 - 10 - 15…40 (metres
or feet).
Select with
Select value with
Confirm with
Load Default
This function allows the User to revert
to the original factory default settings,
thus erasing all settings memorised.
This command must only be used in
the event of programming errors.
Select with
= Yes = No
Confirm with
Exit
To return to the settings menu.
Confirm with