MZ electronic EV-030 - Chain counter setting menu

EV-030 Rev. 07 – 2008
English
35
Chain counter setting menu
Hold down the (ON) key for six
seconds to access the instrument
setting menu. The following page will
appear on the display:
Menu
Measure
Alarms & Function
Settings
Language
Sensor Calibration
Use the (DOWN) and
(UP) keys to move around the menu
options.
Once you are positioned on the item to be modified press the (ON) key to
confirm your choice.
Use the (DOWN) or (UP) keys to move from one parameter to
another.
Once one is positioned on the parameter press the (ON) key to enable
modification.
According to the type of parameter, using the (DOWN) and (UP)
keys it is possible to reduce/increase the value of the same or disable/enable the
function.
Once the modification has been performed, press the (ON) key to confirm.
Using the (DOWN) key go to the Exit option and press the (ON) key
again to return to the setting menu. The same procedure must be used to return to
the main page.