N4L PPA55 Series User Manual

PPA55xx Quick User Guide
Page 56
Torque & Speed:
Set the Torque and Speed parameters to measure the Mechanical Power (Nm)
and Speed (RPM) via the Torque and Speed BNC connectors on the rear of the
instrument
Open up the torque and speed drop
down box to select which type of test
is to be configured
Once a configuration has been selected
you will be required to input a scale
factor relating to both the Mechanical
Power (Nm) and Speed (RPM), both
parameters will then be calculated
against the selected source

N4L PPA55 Series Specifications

General

Brand	N4L
Model	PPA55 Series
Category	Measuring Instruments
Language	English