NAD C 700 V2 - Source Setup

ENGLISH
CONFIGURING C 700
Player
1 Sleep Timer: Stop playback after a set amount of time via gentle
volume decline
2 Room Name: Create a customized room name for the C 700 V2
1
2
3
4
5
10 Amplier Standby: Maintain network connection at network
standby mode
Enabled: C 700 V2 automatically switches to network standby
mode after 15 minutes of no user interaction or active source input.
The C 700 V2 maintains network connection at network standby
mode with reduced system performance. To wake up C 700 V2
from network standby mode, stream content to C 700 V2 using
the BluOS App or press any of the following buttons - rear panel
Standby button, front panel VOLUME-MENU knob and o button of
BC1 remote control.
Disabled: C 700 V2 will not enter network standby mode even with
prolonged no user interaction or active source input.
10
11
12
13
14
3 Tone Controls: Boost or reduce Bass and Treble response levels.
Tone Controls can be enabled or disabled.
4 Subwoofer: Enable or disable connected Subwoofer
5 Crossover: The subwoofer will reproduce only low frequency
information below the selected crossover setting.
6 Auto LCD Brightness: Automatically adjusts the LCD display
brightness according to the ambient lighting.
11 Bluetooth: Set Bluetooth connection to Manual, Automatic, Guest
or Disable Bluetooth availability
12 Volume limits (dB): Set lower limit and upper limit of volume level
in dB units
13 LCD Temporary Display: Enabled mode will turn off display
temporarily after 30 seconds of non-user interface. At enabled
mode and with display turned off, display can be awaken by
pressing front panel a s buttons or rotating the VOLUME-MENU
knob. Disabled mode will keep the front panel display active.
14 Volume In Percent: Volume level is displayed in percent when
enabled. At disabled mode, volume level is displayed in dB.
SOURCE SETUP
Select and configure Source
1 Sources: Select Source to configure
2 Name: Customize the Source’s Name
6
7
8
9
7 LCD Brightness: Adjust front panel display brightness level
8 Indicator Brightness: Change NAD logo indicator brightness to
Normal, Dim or Off
9 Dark Mode: Background of Front View display for particular source
is either dark (enabled) or bright (disabled).
2
3
4
5
12