NAD C 700 V2 - Page 4

4 WIRELESS MANUAL SETUP
a Select your C 700 V2’s unique network ID* from the Wi-Fi Setup connection settings
menu of your tablet, smart phone or computer and connect/join.
b Open the web browser of your device and visit http://10.1.2.3.
c Select Congure WiFi from the “…Control Panel” menu.
d Select your network or applicable wireless network name (SSID) from Congure
Wireless drop-down menu.
e Enter your network’s Wireless Password (Passphrase, WEP/WAP key as applicable) in
the field Enter password or key (if protected).
f Select a Player name from the drop-down list or use the on-screen keyboard to
create a customized room name in the field Custom name.
g Select Update to save all your settings. A Congratulations…screen prompt will
appear to indicate that the network setup process of your C 700 V2 is completed.
h Revisit the Wi-Fi Settings on your device and ensure it has reconnected to your
network (the same network selected at Step d).
i Open desktop BluOS App. Select your C 700 V2 network ID* in the BluOS App that
also shows C700 V2 NEEDS SETUP.
j Select your C 700 V2 from Add Player window to proceed with the setup
k Input the Name you prefer to identify your C 700 V2. You can either keep the Player
Name entered in Step f or rename it again. Select Next to continue.
l Network setup process proceeds automatically. As it advances, it will automatically
enter Looking for Upgrade mode. If a firmware upgrade is available, it will be
installed automatically.
m Network setup process is completed when All Done! is shown in the App. Select
Finish to exit the setup process.
©2024 NAD ELECTRONICS INTERNATIONAL, A DIVISION OF LENBROOK INDUSTRIES LIMITED
All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited.
No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.
C700V2QSGEN13  07/24