Need help?Do you have a question about the NAD D3020 and is the answer not in the manual?
General| Subwoofer Output | Yes |
|---|---|
| DAC Resolution | 24-bit/96 kHz |
| Power Output | 30W into 8 Ohms |
| Inputs | 1 x Coaxial, 2 x Optical, 1 x USB, 1 x Analog |
| Bluetooth | Yes, aptX |
| Analog Inputs | 1 x RCA |
| Headphone Output | Yes (3.5mm) |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 10 kOhms |
| Total Harmonic Distortion (THD) | <0.005% |
Essential safety and servicing procedures to prevent hazards and component damage.
Guidelines for safe and optimal product installation and placement.
General guidelines to follow before and during product servicing.
Procedure to test electrical insulation resistance for safety.
Precautions for handling sensitive electronic components to prevent damage.
Technical parameters related to the audio performance of the amplifier.
General technical details including dimensions, weight, and power consumption.
Visual representation of electrical connections between components.
High-level overview of the amplifier's functional blocks and data flow.
Circuit diagram for the CS42528 codec on the preamp board.
Circuit diagram for the NJW1194 volume control on the preamp board.
Circuit diagram for the TAS1020APFB USB audio controller.
Step-by-step guide to diagnose and resolve common product issues.
Part 1 of 3 detailed circuit diagrams for the preamp section.
Part 2 of 3 detailed circuit diagrams for the preamp section.
Part 3 of 3 detailed circuit diagrams for the preamp section.
Details and connections for the Connecting 2 board.
Details and schematics for the audio output board.
Details and schematics for the sub-out board.
Details and schematics for the potentiometer control board.
Details and schematics for the trigger control board.
Details and schematics for the Front Panel Processor board.
Details and schematics for the Touch A interface board.
Details and schematics for the Touch B interface board.
Details and schematics for Power Supply Unit 1.
Details and schematics for Power Supply Unit 2.
PCB layout views for Preamp and Connecting 2 boards.
PCB layout views for the Output board.
PCB layout views for Sub Out, Pot, and Headphone boards.
PCB layout views for Trigger and Connecting boards.
PCB layout views for the FPP board.
PCB layout views for Touch A and Touch B boards.
PCB layout views for the PSU-1 board.
PCB layout views for the PSU-2 board.
List of diodes, transistors, MOSFETs, and inductors with part details.
Comprehensive list of resistors and capacitors with values.
List of integrated circuits with part numbers and descriptions.
List of connectors, transformers, fuses, and assembly fasteners.
List of mechanical metal parts and packaging details.
List of included product accessories.
Visual breakdown and list of mechanical components.
Visual breakdown and identification of electrical assemblies.
To Next Page
