NAIM Amplifiers - 35 NAP 300 Connections; 35.1 NAP 300 Connected to NAP 300 PS

34
Supercap, XPS, Hi-Cap
mains input
and fuse
50 Installation
Power supplies should be installed in their final location before connecting cables or
switching on. Ensure that power amplifiers are switched off and the preamplifier volume
is turned down before power supplies are switched on. The power buttons are located
on the front panel.
Power supplies are heavy and care should be taken when lifting or moving them. Make
sure that the surface on which they are to be placed can support their full weight.
50.1 Supercap Rear
socket
1
socket
2
socket
4
socket
3
socket
5
NAC 252
or SNAXO
only
NAC 252
only
+ve
-ve
+ve
ch1
+ve
ch2
Socket 1
+ve
-ve
+ve
nc
+ve
nc
Socket 2
ch2
-ve
ch1
nc
Socket 3, 4 & 5
mains input and fuse
50.2 XPS Rear
multiple power output
mains input and fuse
50.3 Hi-Cap Rear
socket 1
socket 2
socket 3
socket 4
ch2
-ve
ch1
nc
Socket 1, 2 & 3
+ve
-ve
+ve
ch1
+ve
ch2
Socket 4