NAIM Amplifiers - NAPV 145 Power Amplifier; 40 Installation and Operation; 40.2 Protection Notes; 40.3 Loudspeaker Cable and Connectors

36
53 Declaration of conformity to appropriate standards
Manufacturer Naim Audio Limited, Southampton Road, Salisbury, England, SP1 2LN
Products Preamplifiers - NAC 552, NAC 252, NAC 282, NAC 202, NAC 112x
Integrated Amplifier - NAIT 5i
Power Amplifiers - NAP 500/NAP 500PS, NAP 300/NAP 300PS, NAP 250, NAPV 145, NAP 200, NAP
150x, NAPV 175, NAP 6-50
Power Supplies - Supercap, XPS, Hi-Cap, Flatcap 2, NAPSA, NAPSC
Safety EN 60065
EMC
Emissions Tested to: EN 55013 - Sound and television broadcast receivers and associated equipment
BS EN 61000-3-2: 2002 - Limits for harmonic current emissions (equipment input currents up to and
including 16 A per phase)
Immunity Tested to: EN55020 - Electromagnetic immunity of broadcast receivers and associated equipment
In accordance with: CISPR 16-1 - Radio disturbance and immunity measuring apparatus
CISPR 16-2 Methods of measurement of disturbances and immunity
IEC 801-2 8kV (air gap) 4kV (contact) (performance criterion B)
IEC 801-3 3V/m 20dB (performance criterion A)
IEC 801-4 1kV (AC lines) 0.5kV (signal lines) (performance criterion B)
Power Supplies
52 Power Supply Specifications
Product
Supercap
XPS
Hi-Cap
Flatcap 2
NAPSA
NAPSC
Outputs:
13 x 24V ±22V 2 x 24V 2 x 22V 116Vac 18.5V
2 x 12V ±10V 2 x 24V
2 x 15V
Dimensions (mm):
87 x 432 x 314 87 x 432 x 314 87 x 207 x 314 70 x 432 x 304 87 x 207 x 314 57 x 121 x 187
(H x W x D)
Weight:
11.6kg 12.4kg 7.35kg 5.4kg 6.75kg 2.1kg
Mains Supply:
100-120V or 220-240V, 50/60Hz