Chapter 10
Self-Diagnostic and Troubleshooting
10.1 Self-Diagnostic Function 10 - 3.................
10.1.1 Allowing Duplicated Output 10 - 4.......
10.1.2 Continuing After an Operation Error 10 - 4
10.2 Troubleshooting 10 - 5.........................
10.2.1 ERROR/ALARM LED is Blinking 10 - 5...
10.2.2 ERROR/ALARM LED is ON 10 - 7.......
10.2.3 All LEDs are OFF 10 - 7................
10.2.4 Diagnosing Output Malfunction 10 - 8....
10.2.5 Communication Error
with Programming Software 10 - 10......
10.2.6 PROTECT ERROR is Displayed 10 - 11..
10.2.7 Program Mode does not Change
to RUN 10 - 11........................
10.3 Error Codes 10 - 12...........................
10.3.1 Total-Check Function 10 - 12...........
10.3.1.1 Syntax Check Error 10 - 12.....
10.3.1.2 Self-Diagnostic Error 10 - 13....
10.3.2 Syntax Check Error Codes 10 - 14.......
10.3.3 Self-Diagnostic Error Codes 10 - 15.....
To Next Page
Loading...
Need help?
General
