Why is there water mixed into the lubricant oil of my Nanni Engine?
If water is mixed into the lubricant oil of your Nanni Engine, it could be due to a defective head gasket (replace) or a flawed cylinder block or cylinder head (replace).
What causes high oil pressure in a Nanni Engine?
High oil pressure in your Nanni Engine can be caused by using a different type of oil (use specified type of oil) or a defective relief valve (replace).
How to troubleshoot a Nanni Engine that does not start?
If your Nanni Engine does not start, it could be due to several reasons. You may have no fuel, in which case you should replenish it. Another reason may be air in the fuel system, so you should vent it. There might be water in the fuel system, in which case you should change the fuel and repair or replace the fuel system. The fuel hose or filter could also be clogged, so you should clean or replace them. Other potential causes include excessively high viscosity of fuel or engine oil at low temperature (use specified fuel or engine oil), low cetane number (use specified fuel), fuel leak (tighten retaining nut), incorrect injection timing (adjust), worn fuel camshaft (replace), clogged injection nozzle (clean or replace), malfunctioning injection pump (repair or replace), seizure of engine p...
Explains the use and meaning of the safety alert symbol.
Lists essential safety steps before starting engine repair or use.
Guidelines for safe engine starting and working practices.
Addresses fire safety, fluid disposal, acid burns, and emergency preparedness.
Technical data and specifications for D1503-M, D1703-M, D1803-M models.
Technical data and specifications for V2203-M, V2403-M models.
Diagnosing problems with engine starting and smooth operation.
Interpreting exhaust colors and diagnosing low engine power.
Addressing engine oil usage and pressure problems.
Troubleshooting engine overheating and battery discharge.
Key measurements for engine block, valve train, and gears.
To Next Page
General
