December 2008
Document #: 720002-0000R 14
4 Media and Supplies Guide
4.1 Media Specifications
The printer requires qualified thermal paper with the following specifications:
• Ticket dimensions shall be 65mm +/- 1mm (2.56” +/- 0.040”) x 156mm +/-1mm (6.14” +/-
0.040”)
• Paper stock shall be furnished in bulk stacks of 800 tickets.
• Tickets shall be attached (chained) to one another at 156mm intervals and supplied in
“fan-folded” format
• Attachment between tickets shall be made with perforations across the paper width
(65mm).
• The perforations shall also define the fold point in the paper stock.
• Perforation (burst) strength, or pull force, shall be 1.3lbs +/- 0.4lbs (0.59Kgs +/- 0.18Kgs)
4.2 Ordering Thermal Paper
We recommend the following paper grade produced by Graphic Controls and Slot Tickets. There
are a number of paper converters qualified to supply this paper, provided the stacks are from
these recommended grades. We would be happy to provide a quote for qualifying additional
grades not listed below.
Manufacturer Contact Person Contact Numbers
Graphic Controls LLC
400 Exchange Street
Buffalo, New York
14204
United States of America
Suzanne Talbott 800-669-1535 Tel
800-347-2420 Fax
Slot-Tickets
6972 Appling Farms
Parkway
Suite 105
Memphis, Tennessee
38133
United States of America
Susan Mitchell 901-377-1849 Tel
901-377-1102 Fax
Table 8: Ordering Thermal Paper
To Next Page
Loading...
