NARDA ELT-400 - Page 64

7 Remote control ELT-400
7-18
CALC:OVLD<SP><param>[CR]<LF>
CALC:OVLD?[CR]<LF>
Response:
<param><CR><LF>
Meaning:
Sets whether or not overload status information is returned at the end of a
result:
The overload status indication is appended to the response values for a field
measurement.
ª Remote control command MEAS, see page 7-14
MEAS:BAT?[CR]<LF>
Response:
<param><CR><LF>
Meaning:
Queries the current battery voltage (measured value, units) separated by a
comma.
Example: 4987, mV
param Explanation
ON Overload status indicator response every time a measured value
is transferred.
OFF No overload status indicator response.
Table 7-13 Overload status indicator response settings