National Instruments cDAQ-9133 User Manual

Index
I-6 | ni.com
SATA configuration, A-5
USB configuration, A-5
support, technical, C-1
synchronization modes, 5-39
100 MHz source, 5-39
external source less than 40 MHz, 5-40
internal source less than 40 MHz, 5-40
system CMOS, A-1
T
technical support, B-3, C-1
training, B-3
training and certification (NI resources), C-1
trigger
arm start, 5-38
pause, 5-38
start, 5-38
troubleshooting (NI resources), C-1
two-signal edge-separation measurement,
5-21
buffered, 5-22
single, 5-22
U
unpacking, 1-5
USB
configuration submenu, A-5
device port, 1-32
host ports, 1-31
USER1
button, 1-40
LED, 1-34
V
video, mini DisplayPort, 1-31
W
wall mounting, 1-21
Web resources, C-1
Windows Embedded Standard 7
Ethernet ports, 1-35
installation and configuration, 1-6
restoring hard drive to factory default
condition, A-1
wiring power, 1-15
X
X1 encoding, 5-19
X2 encoding, 5-19
X4 encoding, 5-20

National Instruments cDAQ-9133 Specifications

General

Brand	National Instruments
Model	cDAQ-9133
Category	Controller
Language	English