National Instruments cDAQ-9133 - Page 144

NI cDAQ-9132/9133/9134/9135/9136/9137 User Manual
© National Instruments | I-5
P
panel mounting, 1-21
pause trigger, 5-38
period measurement, 5-18
PFI 0 SMB connector, 1-38
PFI filters, 4-13
ports
Ethernet, 1-35
NI-XNET CAN/LIN, 1-37
overview, 1-45
PFI 0 SMB, 1-38
RS-232 serial, 1-38
USB device, 1-32
USB host, 1-31
video (mini DisplayPort), 1-31
position measurement, 5-19
buffered, 5-21
POWER
button, 1-33
LED, 1-34
power, wiring, 1-15
power/wake configuration submenu, A-4
prescaling, 5-39
processor, overview, 1-45
programming examples (NI resources), C-1
pulse
encoders, 5-21
generation for ETS, 5-32
train generation, 5-25
continuous, 5-27
pulse-width measurement, 5-5
implicit buffered, 5-6
single, 5-5
Q
quadrature encoders, 5-19
R
rack mount kit, 1-27
reciprocal frequency measurement, 5-12
related documentation, B-1
removing modules, 1-18
RESET button, 1-33
resetting the system CMOS and BIOS
settings, A-8
restoring hard drive, A-1
retriggerable single pulse generation, 5-26
RS-232 serial port, 1-38
S
safety guidelines, 1-3
sample clock
edge counting, 5-4
measurement, 5-21
SATA configuration submenu, A-5
save and exit menu, A-8
security menu, A-8
semi-period measurement, 5-8
implicit buffered, 5-9
single, 5-9
serial ports
RS-232, 1-38
simple pulse generation, 5-24
single
point edge counting, 5-3
pulse generation, 5-24
retriggerable, 5-26
with start trigger, 5-25
pulse-width measurement, 5-5
semi-period measurement, 5-9
two-signal edge-separation
measurement, 5-22
software (NI resources), C-1
software-timed generations
analog output, 3-1
digital output, 4-8
start trigger, 5-38
STATUS LED, 1-34
STC3, 1-44
submenus
boot settings configuration, A-7
CD/DVD ROM drive BBS priorities,
A-7
console redirection settings, A-6
floppy drive BBS priorities, A-7
hard drive BBS priorities, A-7
network device BBS priorities, A-8
power/wake configuration, A-4