Chapter 3 Hardware and Software Configuration
© National Instruments Corporation 3-15 FP-2000/2010/2015 User Manual
Figure 3-1. Using FieldPoint Explorer to Monitor I/O Channels
Writing to an Output Channel
You can write to output channels of I/O Items that you have configured.
1. In the left pane of FieldPoint Explorer, select a device with output
channels.
2. Select the I/O Item in the right pane that corresponds to the channel
to which you want to write.
3. Click the pencil and paper icon in the toolbar to write to the I/O
channel(s) represented by the I/O Item.
To Next Page
Loading...
