Chapter 5 LabVIEW RT Programming
FP-2000/2010/2015 User Manual 5-6 ni.com
or an IP address fail and slow down the system. Place frequently matched entries toward
the bottom of the RT Target Access List to improve system performance.
RT Target: Miscellaneous
Use RT Target: Miscellaneous options to launch LabVIEW RT
applications at system startup and to specify the Downloaded VI Path.
Complete the following steps to open the RT Target: Miscellaneous
dialog box:
1. Target LabVIEW RT to the FP-20xx. Refer to the Targeting LabVIEW
RT to the FP-20xx section for more information.
2. Select Tools»Network Options.
3. Select RT Target: Miscellaneous from the pull-down menu to see the
following dialog box.
Use the Application Path and Launch Application at Boot-up settings to
automatically launch a built LabVIEW RT application when you start up
the FP-20xx. The LabVIEW RT Engine launches the built application
specified by Application Path when you start up the FP-20xx.The
specified path also determines the path and application name that appear
when you target LabVIEW RT to the FP-20xx and create an embedded
LabVIEW RT application. Refer to the Embedding Applications on the
FP-20xx and Launching Embedded Applications at Startup sections for
more information about embedding and launching LabVIEW RT
applications on the FP-20xx.
To Next Page
Loading...
