Appendix A Choosing Network Settings
FP-2000/2010/2015 User Manual A-4 ni.com
Viewing and Editing the FP-20xx TCP/IP Settings
Follow these steps to view the TCP/IP settings:
1. In FieldPoint Explorer, right-click the Comm Resource and select Edit
this comm resource.
2. Click Browse to launch Remote System Explorer.
3. In Remote System Explorer, double-click the serial number of the
FP-20xx whose settings you would like to view or change.
4. When you are done, click OK.ClickCancel to discard any changes
you have made.
To Next Page
Loading...
