National Instruments FieldPoint FP-2000 - Page 9

Chapter 1 Overview of the FP-20xx Network Module
FP-2000/2010/2015 User Manual 1-2 ni.com
Figure 1-1. FP-20xx Parts Locator Diagram
A FieldPoint bank consists of one network module, one or more terminal
bases, and one or more I/O modules. Each FP-20xx can support up to nine
I/O modules. Each bank can be accessed by an unlimited number of host
computers or FieldPoint modules, forming a distributed computing system.
The maximum number of FP-20xx network modules that can be installed
on your Ethernet network is limited only by your network topology.
The FP-20xx network module connects directly to a 10 or 100 Mbps
Ethernet network. The module auto-detects the speed of the connection
and configures itself accordingly.
Figure 1-2 shows an FP-20xx connected to an Ethernet network.
For detailed hardware specifications and cabling information, refer to
Appendix E, Specifications.
1 DIP Switches
2 LED Indicators
3 Local Bus Connector
4 Power Connector
5 RS-232 Serial Port
6 Rail Clip
7 Ethernet Port
POWER
STATUS
LINK
ACTIVE
100 Mbps
ABCD
O
F
F
/
O
N
1
2
3
4
5
Ethernet Controller Module
LabVIEW RT Series
10/100 Mbps
RS-232
2
1
7
5
6
4
3
DISABLE VI
SAFE MODE
RESET
START UP
SETTINGS