© National Instruments Corporation 11 NI Digital Multimeters Getting Started Guide
Using the USB DMM on a Desktop
Note The plastic guides on the underside of the USB DMM allow stacking on top of other National
Instruments USB devices, such as the NI USB-5133 high-speed digitizer. Do not apply the rubber
feet if you are stacking the USB DMM on top of another National Instruments USB device.
For secure desktop use, adhere the supplied rubber, non-skid feet to the underside of the device,
as shown in Figure 7.
Figure 7. Applying Rubber Feet to the USB DMM
1USB DMM 2 Plastic Guides 3 Rubber Feet
2
2
1
3
To Next Page
Loading...
Need help?
General