National Instruments NI PXIe-1085 - Page 51

© National Instruments | A-7
NI PXIe-1085 Series User Manual
Waste Electrical and Electronic Equipment (WEEE)
EU Customers At the end of the product life cycle, all products must be sent to
a WEEE recycling center. For more information about WEEE recycling centers,
National Instruments WEEE initiatives, and compliance with WEEE Directive
2002/96/EC on Waste and Electronic Equipment, visit
ni.com/environment/
weee
.
Backplane
Size ................................................................... 3U-sized; one system slot (with three system
expansion slots) and 17 peripheral slots.
Compliant with IEEE 1101.10 mechanical
packaging. PXI Express Specification
compliant. Accepts both PXI Express and
CompactPCI (PICMG 2.0 R 3.0) 3U modules.
Backplane bare-board material ......................... UL 94 V-0 Recognized
Backplane connectors ....................................... Conforms to IEC 917 and IEC 1076-4-101, and
are UL 94 V-0 rated
System Synchronization Clocks (PXI_CLK10,
PXIe_CLK100, PXIe_SYNC100)
10 MHz System Reference Clock: PXI_CLK10
Maximum slot-to-slot skew .............................. 1 ns
Accuracy ........................................................... ±25 ppm max. (guaranteed over the operating
temperature range)
Maximum jitter ................................................. 5 ps RMS phase-jitter (10 Hz to 1 MHz range)
Duty-factor........................................................ 45% to 55%
Unloaded signal swing...................................... 3.3 V ±0.3 V
Note For other specifications refer to the PXI-1 Hardware Specification.
⬉ᄤֵᙃѻક∵ᶧ᥻ࠊㅵ⧚ࡲ⊩ ˄Ё೑
RoHS
˅
Ё೑ᅶ᠋
National Instruments
ヺড়Ё೑⬉ᄤֵᙃѻકЁ䰤ࠊՓ⫼ᶤѯ᳝ᆇ⠽䋼ᣛҸ
(RoHS)
DŽ݇Ѣ
National Instruments
Ё೑
RoHS
ড়㾘ᗻֵᙃˈ䇋ⱏᔩ
ni.com/
environment/rohs_china
DŽ
(For information about China RoHS compliance,
go to
ni.com/environment/rohs_china
.)