B-2 | ni.com
Appendix B Where to Go from Here
LabVIEW
Refer to ni.com/gettingstarted for more information about getting started with
LabVIEW.
Use the LabVIEW Help, available by selecting Help»LabVIEW Help in LabVIEW, to access
information about LabVIEW programming concepts, step-by-step instructions for using
LabVIEW, and reference information about LabVIEW VIs, functions, palettes, menus, and
tools. Refer to the following locations on the Contents tab of the LabVIEW Help for information
about NI-DAQmx:
• VI and Function Reference»Measurement I/O VIs and Functions»DAQmx - Data
Acquisition VIs and Functions—Describes the LabVIEW NI-DAQmx VIs and functions.
• Property and Method Reference»NI-DAQmx Properties—Contains the property
reference.
• Taking Measurements—Contains the conceptual and how-to information you need to
acquire and analyze measurement data in LabVIEW, including common measurements,
measurement fundamentals, NI-DAQmx key concepts, and device considerations.
LabVIEW NXG
Refer to the Taking NI-DAQmx Measurements lessons to assist in getting started in LabVIEW
NXG, beginning with NI-DAQmx API Basics. To access these lessons, enter taking
NI-DAQmx measurements in the Search bar in LabVIEW NXG.
LabWindows/CVI
The Data Acquisition book of the LabWindows/CVI Help contains Taking an NI-DAQmx
Measurement in LabWindows/CVI, which includes step-by-step instructions about creating a
measurement task using the DAQ Assistant. In LabWindows
™
/CVI
™
, select Help»Contents,
then select Using LabWindows/CVI»Data Acquisition. This book also contains information
about accessing detailed information through the NI-DAQmx Help.
The NI-DAQmx Library book of the LabWindows/CVI Help contains API overviews and
function reference for NI-DAQmx. Select Library Reference»NI-DAQmx Library in the
LabWindows/CVI Help.
To Next Page
Loading...
