© National Instruments | A-3
PXIe-8840 User Manual
Relative humidity range.................................... 10% to 90%, noncondensing
(Tested in accordance with IEC-60068-2-56.)
Caution The operating temperature must not be exceeded, even when used in a
chassis with a higher temperature range.
Storage Environment
Ambient temperature range .............................. -40 to 65 °C
(Tested in accordance with IEC-60068-2-1 and
IEC-60068-2-2. Meets MIL-PRF-28800F
Class 3 low temperature limit.)
Extended temperature option............................ -40 to 71 °C
(Tested in accordance with IEC-60068-2-1 and
IEC-60068-2-2. Meets MIL-PRF-28800F
Class 3 limits.)
Relative humidity range.................................... 5% to 95%, noncondensing
(Tested in accordance with IEC-60068-2-56.)
Shock and Vibration
Operating shock ................................................ 30 g peak, half-sine, 11 ms pulse
(Tested in accordance with IEC-60068-2-27.
Meets MIL-PRF-28800F Class 2 limits.)
Random vibration
Operating .................................................. 5 to 500 Hz, 0.3 g
rms
(with solid-state hard drive)
Nonoperating ............................................ 5 to 500 Hz, 2.4 g
rms
(Tested in accordance with IEC-60068-2-64.
Nonoperating test profile exceeds the
requirements of MIL-PRF-28800F, Class 3.)
Note Specifications are subject to change without notice.
Safety
This product is designed to meet the requirements of the following standards of safety for
electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Note For UL and other safety certifications, refer to the product label or the Online
Product Certification section.
To Next Page
Loading...
Need help?
General
