© National Instruments | A-5
RMC-8357 User Manual
Operating location Indoor use only
Maximum altitude 2,000 m
Installation Category II
Pollution Degree 2
Acoustic Emissions
Sound pressure level (at operator position) < 70 dBA
Safety
This product is designed to meet the requirements of the following standards of safety for
information technology equipment:
• IEC 60950-1, EN 60950-1
• UL 60950-1, CSA 60950-1
Caution Overloading the circuits may damage supply wiring. Do not exceed the
ratings on the equipment nameplate when connecting equipment to the supply circuit.
Note For UL and other safety certifications, refer to the product label or the Online
Product Certification section.
Online Product Certification
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance
information. To obtain product certifications and the DoC for this product, visit ni.com/
certification
, search by model number or product line, and click the appropriate link in
the Certification column.
To Next Page
Loading...
Need help?
General
