Index
I-2 | ni.com
RMC-8356
chassis cooling considerations, 2-2
installation, 2-1
RMC-8357
boot options, 4-2
chassis configuration, 4-2
common configuration questions, 4-1
configuration, hardware, B-1
connectors, 3-1
Ethernet, 3-5
serial connector and signals, 3-3
Universal Serial Bus (USB)
connector and signals, 3-2
VGA, 3-4
description, 1-4
front panel LEDs, 4-1
hardware configuration, B-1
installing in rack (figure), 2-43
key features, 1-2
overview, 1-2
peripheral expansion overview
(table), 3-1
troubleshooting, 5-1
using with PXI chassis, 4-2
S
safety specifications, A-5
serial connector, 3-3
connector locations and pinout
(figure), 3-3
connector signals (table), 3-3
serial ports, 3-1
See also COM1 and COM2 connectors
shock and vibration specifications, A-3
slide mounting brackets, installing in rack
(figure), 2-41
specifications
acoustic emissions, A-5
CPU, A-2
electrical, A-1
environmental, A-4
environmental management, A-6
hard disk drive, A-2
mainboard, A-2
mechanical, A-3
memory, A-2
safety, A-5
shock and vibration, A-3
T
troubleshooting
controller does not boot, 5-1
damaged module, 5-2
video display, 5-2
U
Universal Serial Bus (USB), 3-1
connector location and pinout
(figure), 3-2
connector signals (table), 3-2
connectors and signals, 3-2
overview (table), 3-1
unpacking the RMC-8357, 1-1
V
VGA
connector and signals, 3-4
connector signals (table), 3-4
location and pinout (figure), 3-4
overview (table), 3-1
video, 3-1
See also VGA
To Previous Page
Loading...
Need help?
General
