Native Instruments Guitar Rig Kontrol User Manual

GUITAR RIG KONTROL Hardware Reference – 14
3. Follow the on-screen instructions, which will guide you through the installation procedure.
4. You will be asked to specify the path to the plug-in folder of your DAW (Digital Audio
Workstation, e.g. your sequencer software). If you will use GUITAR RIG 4 exclusively in
standalone mode, or if you don’t know what a plug-in is, just use the standard setting.
5. You will be asked if you want to install drivers for the GUITAR RIG audio interfaces.
Select “RIG KONTROL” and click on “Continue”.
6. During installation of the driver, several Windows security messages will
show up, e.g. “The driver has not passed the Windows Logo Test” or
“Windows can’t verify the publisher of this driver software”. Don’t worry,
everything is ne here. Simply click “Continue anyway” (Windows XP) or “Install
this driver software anyway” (Windows Vista) to continue the installation.
7. Restart your computer upon completion.

Native Instruments Guitar Rig Kontrol Specifications

General

Brand	Native Instruments
Model	Guitar Rig Kontrol
Category	Music Pedal
Language	English