Native Instruments Guitar Rig Kontrol User Manual

GUITAR RIG KONTROL Hardware Reference – 26
5 Installation under Mac OS X
This chapter describes the basic installation of the RIG KONTROL hardware under Mac OS
X, focusing on the setup of the audio interface. To activate the foot pedal as a controller
in GUITAR RIG 4 and to use its MIDI capabilities, please refer to section 6 of this manual.
For detailed information about the GUITAR RIG 4 software, please consult the Application
Reference. You can nd it on the product CD or in the GUITAR RIG 4 menu under Help
> Open Manual > Your Language.
5.1 Software Installation
Make sure you are logged in with administrator privileges. Don’t connect the RIG KONTROL yet.
1. Browse the content of the product CD and locate the le “Guitar Rig 4 Installer”. If
you are using a download version of GUITAR RIG 4, you need to extract the installer
le rst.
2. Double- click the installer file to s tar t the installation procedure.

Native Instruments Guitar Rig Kontrol Specifications

General

Brand	Native Instruments
Model	Guitar Rig Kontrol
Category	Music Pedal
Language	English