Native Instruments Monark User Manual

MIXER Parameters
View A—MIXER section.
(1) VOLUME: Set the volume level of OSCILLATOR 1, 2 and 3. This can be used to mix the
volume level of each oscillator.
(2) On/Off button: Each sound source (OSCILLATOR 1, 2, 3, FEEDBACK and NOISE) can be
switched on or off. When switched on the output of the sound source can be heard in the mas-
ter output. This does not deactivate the sound source but only mutes it.
Due to the very accurate modeling of this synthesizer an audio signal (filter leakage in this
case) may still be heard even when all sound sources are switched off. To control this
"leakage" please refer to ↑5.3.5, OSCILLATORS Section.
Overview of MONARK Ensemble
View A—Overview of MONARK User Interface
MONARK - Manual - 26

Native Instruments Monark Specifications

General

Brand	Native Instruments
Model	Monark
Category	Software
Language	English