(2) FINE: This is used to tune the oscillators +/– 7 semitones.
GLIDE section
(3) Glide type: Selects between an authentic almost linear constant rate (MM) and an alterna-
tive constant time (SILVER) glide with a decelerating curving.
(4) Legato mode: The glide in MONARK can either be active ALWAYS, only when playing LE-
GATO style, by having notes overlap or turned OFF.
(5) TIME: Sets the glide time. The actual glide time depends on the selected mode.
MODULATION section
(6) PB (pitch bend): The pitch bend is used to bend the pitch of a note up or down during a
performance. The range of the pitch bend can be set in View B. See ↑5.3.3, PITCH BEND Sec-
tion for more details.
(7) Modulation wheel: Controls the amount of filter and oscillator pitch modulation simultane-
ously from OSCILLATOR 3 or NOISE. As the modulation wheel is moved upward modulation is
increasingly applied to the pitch of the sound and filter cutoff frequency if the MOD switches
are activated in the OSCILLATORS or FILTER & AMP sections. See MOD in ↑5.2.1, OSCILLA-
TORS Section section and ↑5.2.3, FILTER & AMP Section for more information.
(8) MIX: Allows you to blend between the output signal of OSC 3 (OSCILLATOR 3) and the
NOISE (pink/red noise) source for modulation purposes.
5.3
View B─Overview of MONARK User Interface
View B offers many options to customize MONARK to your personal taste. You might prefer a
"cleaner" engine and modern performance features. Or you might go for total authenticity.
Overview of MONARK Ensemble
View B─Overview of MONARK User Interface
MONARK - Manual - 38
To Next Page
Loading...
Need help?
General
