Triggering Samples
Once the Remix Set is loaded into the Deck you can trigger the Samples:
1. Press Pad 1 - 4 to trigger the corresponding Samples.
The Deck and the Samples play back and the Pads brightly light up. When a one-shot Sam-
ple is triggered, the Pad lights up brightly as long as the Sample plays back.
2. To stop the playback of a Sample, press and hold SHIFT to access the Decks secondary
functions.
The colors of the first row of Pads change to white.
3. While holding SHIFT, press the Pad for the corresponding Sample you want to stop play-
back.
The Sample stops immediately and the Pad turns dim. The Deck playback continues.
Adjusting Sample Slot Volume
The volume level of any Sample Slot can be adjusted and muted individually:
To adjust the volume level of a Sample Slot:
1. Press and hold the Pad below the Pad for the corresponding Sample to access the sound
controls for the Sample Slot.
The display shows the current volume and filter parameter values.
2. While holding the Pad, turn the MOVE encoder clockwise or counter-wise to adjust the vol-
ume for the Sample Slot.
Tutorials
66
To Next Page
Loading...
