7.19. Correcting Beatgrids
When a track contains a complex rhythm or uneven timing, in some instances the Beatgrid calcu-
lated by TRAKTOR does not precisely match the beat of the track. It is then not possible to match
the beats of that track when mixing using the SYNC function. Incorrect Beatgrids can be corrected
using the GRID mode on the S4. The GRID mode allows you to check and correct the Beatgrid of
tracks:
Checking Beatgrid
1. Load a track into a Deck.
2. Press Play/Pause to start playback of the track.
3. Press the CUE button in the Mixer channel.
4. Press the JOG button to enable Jog Wheel mode.
5. Press and hold the GRID button on the Deck to make the Beatgrid audible.
Tutorials
75
To Next Page
Loading...
