Native Instruments TRAKTOR KONTROL S4 User Manual

Besides the beat of the track, you now hear a second beat tick (like a metronome) represent-
ing the Beatgrid. If the beat tick does not match the beat of the track, the Beatgrid is obvious-
ly set incorrectly.
Correcting Beatgrid
To correct the the Beatgrid setting, proceed as follows:
1. While holding the GRID button, slightly turn the Jog Wheel clockwise or counter-clockwise to
move the Beatgrid forward or backward, respectively.
By turning the Jog Wheel you are able adjust the Beatgrid, so that the Beat tick matches the
beat of the track.
2. Release the GRID button.
The track's Beatgrid is corrected and saved for the track.
Disable Analysis Lock if Tick is not audible
Ensure the Analysis Lock is disabled for the track to make Beatgrid correction possible.
To disable the Analysis Lock you need to perform the following actions in the TRAKTOR software:
1. Select the Extended Layout in the Layout drop-down menu in the Header.
The Decks provide you with more functions.
2. Click on the Advanced Panel button to open the Advanced Panel for that Deck.
3. Click on GRID to open the GRID page.
4. Disable the Analysis Lock by clicking the Analysis Lock button.
The Beatgrid for the track can now be corrected.
Tutorials
76

Native Instruments TRAKTOR KONTROL S4 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S4
Category	DJ Equipment
Language	English