Brainz BRM3 Brain Monitor Reference Manual | 21
Configuring the BRM3 Brain Monitor
Selecting which graphs are displayed
The graphs that are displayed on the main display can be selected in the System Setup screen.
To select which graphs are to be displayed:
1. On the
Main Menu screen, touch System Setup to go to the System Setup screen.
2. Touch the appropriate check boxes in the
Graph Selection panel, to select or de-select each graph.
At least one graph must be selected.
Setting up the screen saver
The BRM3 Brain Monitor includes a screen saver that activates after a period of inactivity during an
assessment. You can set the screen saver to require the entry of a user name and password to unlock it
(to secure the display from unauthorized personnel).
To set up the screen saver:
1. On the
Main Menu screen, touch System Setup to go to the System Setup screen.
2. Touch the
Screen Saver Enabled check box to select it. Touch the check box again to de-select it.
To change the activation delay of the screen saver, touch the
Activate after arrows to decrease
or increase the delay.
To turn on the screen saver lock feature, touch the
Login required to deactivate check box to select it.
Touch the check box again to de-select it.
The screen saver can be manually activated by selecting the Screen Saver option in the
Tools menu.
User administration
ADMIN account
A user account called ADMIN is created in the factory. This account is provided for the sole purpose of
allowing an administrator to create other user accounts.
The password of the ADMIN account is initially set to “BRAINZ”. The rights associated with the ADMIN
account cannot be changed, although the password can. The account cannot be deleted.
For security reasons, the administrator
must change the password of the ADMIN account before individual user
accounts are set up.
To Next Page
Loading...
