Brainz BRM3 Brain Monitor Reference Manual | 23
Using the BRM3 Brain Monitor
This section contains basic information about operating the BRM3 Brain Monitor. For more detailed instructions, refer
to the
BRM Onscreen Help System.
For an overview of BRM3 Brain Monitor setup and operating instructions, and detailed instructions about attaching the
Neonatal Sensor Set, please refer to the
Quick Guide.
Starting and stopping the BRM3 Brain Monitor
To start the BRM3 Brain Monitor, turn on the power switch. See Figure 8 on page 16.
To turn off the BRM3 Brain Monitor:
1. If an assessment is in progress, touch
Stop (and touch Stop again when the Stop dialog appears).
2. On the
Main Menu screen, touch Shutdown (and touch Yes when the confirmation message
appears).
When the message “Shutdown Complete. It is now safe to reboot your computer” displays, turn off the
power switch.
Do not disconnect any of the cables connecting the BRM3 Brain Monitor’s components, operate the
power switch, or disconnect the AC supply, while the BRM3 Brain Monitor is in use. If any of these
conditions occurs accidentally, reconnect the cables (if necessary) and resume the current assessment.
See
Restoration after AC supply interruption on page 24.
Main Menu screen
The Main Menu screen appears after you have turned on the BRM3 Brain Monitor and logged in. This
screen allows you to access the major functions of the BRM3 Brain Monitor, by touching the “buttons”
displayed.
The functions controlled from the
Main Menu screen are:
Assess Patient: Begin a new patient assessment.
Manage Data: Transfer data files to and from removable media, view previously recorded files,
(see page 27).
System Setup: Configure settings, administer user accounts.
Help: Display the Onscreen Help System, (see page 26).
Log Out: Log out the current user.
Shutdown: Shut down the BRM3 Brain Monitor.
To Next Page
Loading...
