Nautilus E614 Assembly Manual

38
MAINTENANCE
Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do
the necessary tasks.
Equipmentmustberegularlyexaminedfordamageandrepairs.Theownerisresponsibletomakesurethatregular
maintenance is done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer
supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, contact Nautilus Customer Service for
replacement labels.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always
unplug the power cord from the wall outlet and the machine and wait 5 minutes before cleaning,
maintaining or repairing the machine. Place the power cord in a secure location.
Daily:
Beforeeachuse,examinetheexercisemachineforloose,broken,
damaged, or worn parts. Do not use if found in this condition. Repair
orreplaceallpartsattherstsignofwearordamage.Aftereach
workout, use a damp cloth to wipe your machine and Console free of
sweat.
Note:AvoidexcessivemoistureontheConsole.
Weekly:
Check for smooth roller operation. Wipe the machine to remove dust,
dirt, or grime. Clean the rails and surface of the rollers with a damp
cloth.
Apply silicone lubricant to a dry cloth and wipe the rails to eliminate
roller noise.
Note: Do not use petroleum based products.
Monthly
or after 20 hours:
Make sure all bolts and screws are tight. Tighten as necessary.
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free
of moisture.

Nautilus E614 Specifications

General

Brand	Nautilus
Model	E614
Category	Elliptical Trainer
Language	English