Nautilus E614 Assembly Manual

5
SPECIFICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum76”x120”(193cmx305cm).Besurethattheworkoutspaceyou
areutilizinghasadequateheightclearance,takingintoconsiderationtheheightoftheuserandthemaximuminclineof
the elliptical machine.
Basic Assembly Tips
Followthesebasicpointswhenyouassembleyourmachine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly can require 2 people.
Maximum User Weight: 300 lbs. (136 kg)
Machine Weight: 167.3lbs.(75.9kg)
Power Requirements:
 OperationalVoltage:9VDC
 OperatingCurrent: 1500mA
Regulatory Approvals:
 ACPowerAdapter: ULlisted,Rated120V60HzInput,9VDC,
1500mAOutput.Class2.
This product, its packaging, and components contain chemicals known to the State of California to cause cancer,
birthdefects,orreproductiveharm.ThisNoticeisprovidedinaccordancewithCalifornia’sProposition65.Ifyou
wouldlikeadditionalinformation,pleaserefertoourwebsiteatwww.nautilus.com/prop65.
63.2”
(160.5 cm)
71.5”
(181.7 cm)
26.7”
(67.7 cm)

Nautilus E614 Specifications

General

Brand	Nautilus
Model	E614
Category	Elliptical Trainer
Language	English