52
Condition/Problem Things to Check Solution
Squeaking noise
that appears a few
minutes into a workout
and normally will get
progressively worse as
the workout continues
Bolt that connects the
VZLQJDUPVWRWKHD[OH
running through the
console mast
Loosen pivot rod bolt slightly until noise goes away. White
OLWKLXPJUHDVHFDQDOVREHDSSOLHGIRUDWHPSRUDU\¿[&ontact
Customer Service (if inside US/Canada) or your local distribu-
tor (if outside US/Canada).
Roller squeaking on rail Apply silicone lubricant to a dry cloth and wipe the rails to
eliminate roller noise.
Console continuously
cycles through program
screens
Console is in demonstra-
tion mode
Hold down the PAUSE/END button and Left button together for
3 seconds.
Active User does not
change when User button
is pushed
Console is in studio mode Reset the Console (see Console Setup Mode).
If the above step does not resolve the problem, contact Cus-
tomer Service (if inside US/Canada) or your local distributor (if
outside US/Canada).
Workout results will not
sync with Bluetooth
®
en-
abled device
Current console mode Machine must be in Idle Mode to sync. Push the PAUSE/END
button until the Power-Up Mode screen is displayed.
Total time of workout A workout must be longer than 1 minute to be saved and
posted by the Console.
Fitness machine Unplug unit from electrical outlet for 5 minutes. Reconnect to
outlet.
Bluetooth
®
enabled device Consult your device to be sure that the Bluetooth
®
wireless
feature has been enabled on it.
Fitness App 5HYLHZ6SHFL¿FDWLRQVRI)LWQHVV$SSDQGFRQ¿UP\RXUGHYLFH
is compatible.
Contact appsupport@nautilus.com (if inside US/Canada) or
your local distributor (if outside US/Canada) for further assis-
tance.