7
SPECIFICATIONS
Maximum User Weight: 158.8 kg (350 lbs.)
Power Requirements:
120V 220V
Operating Voltage: 120V AC 220V - 240V AC, 50/60Hz
Operating Current: 2 A 2 A
Heart Rate Chest Strap: 1 CR2032 battery 1 CR2032 battery
Machine Weight: NJOEV NJOEV
Total Surface Area (footprint) of equipment: FP
Maximum Pedal Height - with full incline: ´FP
3.1m ( 121” )
1.9m
( 75” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
170 cm
(66.9”)
185.5 cm
(73”)
68.5 cm
(27”)
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
KDUGOHYHOVXUIDFH$OORZDZRUNRXWDUHDRIDPLQLPXPP[P´[´%HVXUHWKDWWKHZRUNRXWVSDFH\RXDUH
XWLOL]LQJKDVDGHTXDWHKHLJKWFOHDUDQFHWDNLQJLQWRFRQVLGHUDWLRQWKHKHLJKWRIWKHXVHUDQGWKHPD[LPXPKHLJKWRIWKH
pedals with the incline fully engaged.
Basic Assembly Tips
Follow these basic points when you as-
semble your machine:
• Read and understand the “Important
Safety Instructions” before assembly.
• Collect all the pieces necessary for
each assembly step.
• Using the recommended wrenches,
turn the bolts and nuts to the right
(clockwise) to tighten, and the left
(counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly lift
and look through the bolt holes to
help insert the bolt through the holes.
• The assembly can require 2 people.