Navkom R7 User Manual

22 23
APPLE
Every new reader needs to be added in the X-manager app
before it can be used. If more than one reader is connected to
a single X-manager app, you must set up the connection to the
readers one at a time. The rest of the readers should not be
connected to a power supply at the time of the rst connection.
CONNECTING THE PHONE TO THE READER
Press ADD and then START.
Conrm the connection by pressing Join.
Enter the desired device name and press SETUP.
1
2
3
SEARCHING DEVICES
SCAN QR CODE
ADD A DEVICE
8
7
2
3
1
CONNECTING AN ADDITIONAL PHONE TO THE READER
A single reader can be managed with more than one phone.
DEVICE INFO
On the phone that the reader is already
connected to, press the i icon next to the reader
name.
Two options appear on the screen:
Press Scan QR code
on the new phone
QR CODE which you
can scan using the
new phone
Show password:
the PASSWORD is
displayed, which
you can enter
manually in the new
phone
Press Manual
setup on the new
phone
4
5
8
7
6
4
6
Press the i icon next to the reader name. Press DELETE. When prompted, conrm the
disconnection.
9
9
APPLE
DISCONNECTING THE READER

Navkom R7 Specifications

General

Brand	Navkom
Model	R7
Category	Control Unit
Language	English