NCR 7601 - Page 102

5-94 Operating System Recovery
8. At the prompt, insert the CD containing the operating system image (disk 1 if OS
occupies more than one disk). Wait until the LED on the DVD drive stops blinking
and then press [Enter].
9. Press [A] at the following prompt to accept the arguments and to begin the restore
process. Press [Enter].
Confirm Pending Operation
Mode is: restore
2) Drive is: USB/SATA Storage A Size: 250GB
3) Directory path is: /Images/
4) Filename is: nnnnnaaa
5) Reboot after operation complete: yes
6) Resize last data partition if possible: no
7) Resize last data partition to: Full Disk
8) Write zeros to drive before restore: no
9) RAID - restore to 2nd drive: none
A) Accept these arguments
V) View OS Documentation
Q) Quit and reboot
10. At the following prompt replace the CD with the next CD. Press [Enter] to continue.
+------+ Automatic mount +------+
| ----------------------------- |
| Please, press “ok” to mount ----- |
| [/dev/cdrom] on [mnt/cdrom] ---- |
| ---------- +----+ ----------- |
| ---------- | Ok | ----------- |
| ---------- +----+ ----------- |
+-------------------------------+
11. Repeat the previous step for each CD as required.
12. Remove the last CD before the system reboots.
13. Complete the OS installation as required per OS.