NCR 7800 - Bar Codes - 4; Code 128; Minimum Data Characters Allowed; Ucc 128

%DU&RGHV
 8VHUV*XLGH
Bar Codes - 4
Contains programming parameters for Code 128 bar codes.
Disable the scanner’s ability to read Code 128 bar codes by
scanning the
Hex 0
tag and enable it (default) by scanning the
Hex 1
tag.
Selecting the disable option does not prevent the scanner from
reading Parameter Programming Tags (found in the
Programming Tags
booklet BST0-2121-74) even though they
are Code 128 bar code tags.
Refers to the Code 128 characters on a numeric-only Code
128 symbol. For example, given a numeric-only Code 128
symbol of "12 34 56 78", the Minimum Data Characters
Allowed would be 4; each Code 128 character is composed of
two numeric data characters. Enter your selection by scanning
the appropriate hex tag (
Hex 1
through
Hex 5
). The default is
three.
Refers to the Uniform Council Code 128 Data Formatter Start
Code. Scan the
Hex 0
tag to disable this function or scan the
Hex 1
tag to enable it. The default is disable.
Code 128
Minimum Data
Characters Allowed
UCC 128