NCR 7800 - Display Parameters; Default Display Time; Character Set Selection

'LVSOD\3DUDPHWHUV
 8VHUV*XLGH
Display Parameters
Allows you to select the default display time and character
set.
Controls the time a temporary display message is displayed.
The selections are from 0 - 9 and increment the time from 10
seconds to 55 seconds, in 5-second intervals. The default
value is a display time of 15 seconds.
There are three character sets which can be selected: Code
Page 850 International English (default), Katakana, and
Cyrillic.
Default Display Time
Character Set Selection