NCR Orderman7 User Manual V01.04 Operating service station/multi service station
10.1.1 Charging the handheld
The handheld unit can be charged by plugging it into the service station or multi service station.
To place the handheld unit in the service station or multi service station, you
must first remove the safety cord!
19: Handheld in service station
Handheld
Service station
Additional battery pack
In addition to the handheld unit, an additional battery pack can also be
charged in the fast-charging slot.
Handheld is in boot process (startup)
Battery is not charging (see Troubleshooting section)
If a charged handheld or battery pack remains in the service station for a
longer period (or in a charged state in the service station or multi service
station), the solid green "Charging status LED" may start flashing again
(charging).
Cause:
The charge control ensures the battery is kept at an optimum charge level.
Orderman GmbH (Part of NCR Corporation) 30