NCR Orderman7 User Manual

NCR Orderman7 User Manual V01.04 Operation
11 Operation
Note:
This manual describes the basic functions of Orderman7 handhelds. All
other functions are controlled by your partner's POS system application.
11.1 Operating conditions of the handhelds
11.1.1 Handheld On/Off
 You can turn on the handheld by pressing the “On/Off button”.
Note
: If the handheld does not turn on, the battery level may be too low (see
Troubleshooting section).
 You can turn off the handheld by pressing and holding the “On/Off button”.
11.1.2 Standby
When the handheld is in ready mode, briefly press the “On/Off button” to switch the unit to standby
mode (display off).
11.2 Acceleration sensor
11.2.1 Flip-View
The handheld is equipped with a tilt sensor. This sensor allows the display to rotate 180 degrees
automatically, depending on the position of the unit (to allow customers to read the display).
11.2.2 Sleep mode
If the handheld is placed top-down in the leather pouch, the unit switches directly to sleep mode. If
the handheld is removed and placed in operating position, the unit will turn on automatically.
Orderman GmbH (Part of NCR Corporation) 33

NCR Orderman7 Specifications

General

Brand	NCR
Model	Orderman7
Category	Handhelds
Language	English