NCR Orderman7 User Manual V01.04 General information
1 General information
This manual applies to Orderman7 handhelds and Orderman accessories.
It covers the following Orderman7 handhelds:
NCR Orderman7
NCR Orderman7
+
NCR Orderman7
MSR
NCR Orderman7
SC
The different versions are described in the following chapters.
1.1 Warranty
All warranty claims must be addressed to your local Orderman contractual partners.
1.2 Software License - Open Source
You can request the open source software licenses, as well as the modified code, by writing to
opensource@orderman.com
.
1.3 Labeling
The labeling provides information on certifications, standards, product descriptions and
manufacturer specifications.
1.3.1 Serial number
With Orderman7, we are switching to 12-character NCR serial numbers that start with "125-" and are
followed by an 8-digit number. You'll find the serial number on the packaging label (SERIAL NO) and
on the inside of the battery compartment (see Fig. 1). Please use only this NCR serial number for all
RMAs and help desk requests.
However, only a 6-digit serial number can be entered in the current System Center (version 1.14.0.0
and higher), as well as in the POS software. As a workaround, please use the emulation serial
number (EMULATION SN) on the packaging label. If the packaging is no longer available, you find a
serial number calculator in our Partner Area at: www.orderman.com
. The calculator converts your
NCR serial number to an emulation serial number.
The serial number is used to uniquely identify the unit.
You will find the serial number in the unit's battery slot.
Orderman GmbH (Part of NCR Corporation) 5
To Next Page
Loading...
Need help?
General