NCR RealPOS 60 - Page 13

Diagnostics 3
POST •Display
•Motherboard
•Peripheral
Stopped Prior to
Boot
ON Flashing
(1/Sec)
No Display:
1. Checkforpowerto
displayifnodisplay
2. Checkcable
connectionbetween
Motherboardand
display
3. Checkforproperly
functioningdisplay
4. ReplaceMotherboard
Display Working:
1. Usedisplayto
determinefailure
pointviaonscreen
messageandBIOS
Setup
Boot Time Boot Media
(HDD, LAN)
ON OFF HDD is Boot Device:
1. CheckHDDstatusin
BIOSSetup
2. Checkconnections
betweenHDDand
Motherboard
3. Replaceorre‐image
HDD
4. ReplaceMotherboard
LAN is Boot Device:
1. CheckforLANlink
andactivityLEDson
theBackPanel
2. CheckLANcable
3. ReplaceMotherboard
Current System
Operation
Suspect Component System State Power LED
Disk Activity
LED
Corrective Action