NCR RealPOS 60 - Clearing the CMOS;Password

Chapter 6: Clearing the CMOS/Password
TheCMOS/Passwordcanbeclearedasfollows.
1. TurnthepoweroffanddisconnectpowerfromtheTerminal.
2. OpentheTopCover.
3. TemporarilymovetheshuntfromtheNormalposition(Pins1‐2)toPins2‐3.
4. MovetheshuntbacktotheNormalposition.
5. ClosetheTopCover.
6. Connectpowerandturnonthe
terminal.CMOS/Passwordisclearedwhenpower
isapplied.
28766
CMOS Clear Jumper
(CLR_CMOS1)
1
2
3
1
2
3
Normal
Position
Temporarily move
Jumper to this position