NCR RealPOS 60 - Removing the Hard Disk Drive

6 Hardware Disassembly
Removing the Hard Disk Drive
TheHardDiskDrive(HDD)ismountedontheinsideoftheTopCover.
1. SqueezethelatchesontheHDDBracketasshowntounlockthebracketfromthe
TopCoverandslidetheHDDBracketasshownuntilyouseeUnlockeddisplayed
intheopeningintheHDDBracket.
2. Tiltthe
HDDononeedgetoremoveitfrom theTopCoverBracketanddisconnect
theHDDData/PowerConnector.
28593
HDD
HDD Bracket
28596
HDD Data/Power Connector