NCR RealPOS 60 - Terminal Disassembly Procedures

4 Hardware Disassembly
Terminal Disassembly Procedures
Thissectionexplainshowtodisassemblethe7601forservicepurposes.
Warning: DisconnecttheACpowerbeforedisassemblingthe Terminal.
Removing the Rear Cable Cover
Note: TheRearCableCoverisoptional.
1. 1.LoosentheCaptiveScrews(2)thatsecurethecovertotherearoftheterminal.
2. Pivotthecoverasshownbelowtodisengagethehingestoremoveitfromthe
terminal.
28679
Captive Screws
Rear Cable Cover
Display Cable
(If located on top of terminal)
Power/LAN Cables
28680
1
2