6-108 SLES 15 SP4 Software RAID Gold Master Image
2.
Select Next. The hard disks present in the system are shown on the left panel.
3. Take note of the recommended partition sizing for disk 1, as this will be followed
when creating the RAID partitions for disk 2.
4. Create the following RAIDpartitions for disk 2:
• /boot/efi
• /
• /home
Note: The Swap Partition can be RAIDed but is optional. In the succeeding steps,
Swap Partition will not be RAIDed.
To create the RAID partition, do the following:
a. From the Hard Disks dropdown list, select the hard disk to partition (nvme1n1).
To Next Page
Loading...
Need help?
General
