NEC DS1000 User Guide

Feature Operation
DS1000/2000 Cordless Telephone User Guide Chapter 2: Features ◆ 25
2
Distinctive Ringing
Distinctive Ringing is enabled by default.
To change your handset’s ringing tone:
- Outside calls ring with two short rings followed by one long.
- Intercom calls ring with one long ring.
1. While idle, press RING/VOL.
- You hear the selected ringing tone. The tone will ring for about 2 seconds unless you press RING/
VOL
to select another tone.
- There are four ring tones from which to choose. The default setting is hi-lited.
To turn the ringer off:
1. While your phone is idle, press and hold ON/OFF MUTE for five seconds.
- The OFF icon will display indicating that the ringer is off.
Do Not Disturb Override
Do Not Disturb Override is disabled by default.
To use Do Not Disturb Override:
1. Dial your co-worker.
2. When you hear DND tone, dial 1.
3. The system automatically places a ringing Intercom call to your co-worker.
Extension Hunting
Extension Hunting is disabled by default.
To temporarily install or remove your extension from your UCD group:
1. Press TALK.
2. Dial *5, then . . .
3. Dial 4 to return your extension to your group, or
Dial 6 to remove your extension from your group.
Display Name Description
Ring Type A High
High pitch ring, loud
Ring Type A Low
High pitch ring, soft
Ring Type B High
Low pitch ring, loud
Ring Type B Low
Low pitch ring, soft
Ring Type C High
High pitch warble, loud
Ring Type C Low
High pitch warble, soft
Ring Off
Vibrate
1
1
While the handset is in the charger, the Ring Off setting uses Ring
Type A Low.

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English